back
How to adjust the curvature of the hard shaft bent glass tempering furnace?
Time:2021-01-13 Hits:1641
  1. First, make a bending mold for the bent tempered glass.  

  2. Allow one person to put the bending mold in the center of the bending section of the rollers and place it on the Kevlar rope while having another person to adjust the curvature of the bending section with the radius increase and decrease switch according to the radius of the curved tempered glass to be produced.  

  3. After completing the position adjustment, manually adjust the curvature of the bending chiller so that the rollers in the bending section are fully aligned with the mold. Write down the computer feedback on bending height and enter the parameters in the dialog box for bending height settings.